Metal/Plastic Primers
- 1-9 of 9 Items
KEM Aqua® 50P Water Reducible Primer
KEM® Aqua® 50P Water Reducible Primer is a low VOC, water reducible acrylic latex type primer designed for the general metal finishing market.KEM Aqua® 65P Water Reducible Sprayfil
KEM® Aqua® 65P Water Reducible SprayFil is a one component, low VOC primer developed to fill and hide profile and surface imperfections on structural foam plastics and metal for the electronic enclosure market. It may also be applied to wood for interior applications.KEM Aqua® Bonding Primer For Plastics
KEM® Aqua® Bonding Primer for Plastics is a one component, low VOC, acrylic latex coating intended as a tie coating or adhesion promoting primer over structural foam plastics, such as polystyrene, polyphenylene oxide, polycarbonate, and gas counter pressure molded plastics. It can be topcoated with a wide range of coatings used in the electronic enclosure market.Polane® 2.8 Plus SprayFil
Polane® 2.8 Plus SprayFil is a two package, 2.8 VOC polyurethane filler designed to fill and/or hide profile and surface imperfections on metal, castings, structural foam plastics, and wood. It also promotes adhesion of topcoats to the substrate.Polane® Plus Sealer
Polane® Plus Sealer is a 3.5 lb/gal VOC complying two-package polyurethane suitable for use as a primer or as a primer sealers on metal, plastic, and wood.Polane® Primer-Sealer
Polane® Primer-Sealer is a two package polyurethane coating recommended for use as a primer over steel or as a primer-sealer over fillers and putties.Polane® SP Primer
Polane® SP Primer is an epoxy-ester based two-component primer. This primer provides very good performance properties as well as good gloss holdout allowing for wet-on-wet topcoat application with Polane® SP, HP, G Plus or HS Plus.Polane® W2 Primer
Polane® W2 Primer is a one component, 2.3 lb/gal VOC, acrylic latex, water reducible primer for the electronic enclosures and general metals markets. It can be applied to structural foam plastics and various metal surfaces.Polystyrene Barrier Coat
Polystyrene Barrier Coat is a low gloss acrylic lacquer intended as a primer or a barrier coat on polystyrene and other structural foam plastics including gas counter pressure types. It is fast drying, promotes adhesion, and prevents solvent attack from the topcoat.
- 1-9 of 9 Items
